View G150XG02V0_2101694.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 1/24 no reproduction and redistribution allowed document version: 0.1 date: february 3, 2005 product functional specification 15 inch xga color tft-lcd module model name: g150xg02 v.0 ( ) draft note: this specification is subject to change without notice. pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 2/24 no reproduction and redistribution allowed contents interface connections 3-2 color input data refernece 3-5 precautions 9 packing 8 cover contents record of revision general description 1 absolute maximum ratings 2 electrical specifications 3 signal electronic characteristic 3-1 signal timing specifications 3-3 signal timing waveforms 3-4 power on/off sequence 3-6 optical sfecifications 4 mechanical characteristics 5 reliablity test items 6 international standards 7 safety 7-1 item no 3-7 function block diagram pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 3/24 no reproduction and redistribution allowed record of revision version date chapter description remark 0.1 feb. 03, 05 first draft (preliminary) pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 4/24 no reproduction and redistribution allowed 1. general description this specification applies to the 15.0 inch color tft-lcd module g150xg02. this module supports the xga (1024(h) x 768(v)) screen format and 16.2m colors (6-bits + frc). all input signals are 1 channel lvds interface compatible. all the design rules of this module can correspond to pswg standard. this module is without any inverter card for backlight. features -xga 1024(h) x 768(v) resolution -50,000 hours lamp life -4 ccfl (cold cathode fluorescent lamp) -high brightness, high contrast ratio -wide viewing angle -fast response time -low power consumption application industrial applications pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 5/24 no reproduction and redistribution allowed * general information the following items are characteristics summary on the table 25 condition: items specification unit note active screen size 15.0 inches 38.1cm diagonal display area 304.128(h) 228.096(v) mm outline dimension 326.5(h) 253.5(v) 14.4(d) (typ.) mm without inverter resolution 1024(r,g,b 3) x 768 pixels pixel pitch 0.297 x 0.297 pixel arrangement rgb vertical stripe display mode tn mode, normally white display colors 16.2m (6-bit + frc for r,g,b) colors typical white luminance 550 nit (typ.) @ 6.5ma [cd/m 2 ] contrast ratio 500:1(typ.) color gamut 60%(typ.) of ntsc response time 12ms(typ.) (tr+tf) ms viewing angle (h/v) 140/120 cr R 10 power consumption 21 w (typ.)(vdd line +ccfl line) w @6.5ma electronic interface 1ch lvds (6 bit + frc) frame rate 60hz(typ.), 75hz(max.) hz weight 1350(max) g surface treatment hard-coating 3h, ag pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 6/24 no reproduction and redistribution allowed 2. absolute maximum ratings the following table shows the maximum values which, if exceeded (8.5ma), may cause faulty operation or damage to the unit. item symbol min. max. unit note logic/lcd drive voltage vdd -0.3 +3.6 volt input voltage of signal vin -0.3 +3.6 volt ccfl current icfl +2.5 +8.5 ma rms operating temperature t op 0 +50 note 1 storage temperature h st -20 +60 note 1 operating humidity h op 20 85 %rh note 1 storage humidity h st 10 90 %rh note 1 vibration - 1/10-200 ! g/hz shock - 50/20 g/ms half sine wave note: 1. temperature and relative humidity range are shown in the figure below. wet bulb temperature should be 39 and no condensation. wet bulb temperature chart pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 7/24 no reproduction and redistribution allowed 3. electrical specification 3-1 signal electrical characteristics each signal characteristics are as follows: values parameter symbol min typ max unit notes lcd: power supply input voltage vcc 3.0 3.3 3.6 vdc power supply input current icc - 1.0 1.1 a 1 power consumption pc - 3.3 3.96 watt 1 allowable ripple & noise vddns - - 100 mvp-p inrush current i rush - - 1.2 apeak 1 lamp power consumption - 17.7 24.7 w 2 life time 50,000 60,000 - hr 4 pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 8/24 no reproduction and redistribution allowed 3-2 interface connections - lcd connector (cn1): df-14h-20p-1.25h (hirose) or equivalent - lvds transmitter : ds90c385 (n.s.) or thc63lvdm83a (thine) or equivalent pin no. symbol function 1 vdd power supply +3.3v 2 vdd power supply +3.3v 3 gnd power ground 4 gnd power ground 5 rx0- - lvds receiver signal (r0-r5, g0) 6 rx0+ + lvds receiver signal (r0-r5, g0) 7 gnd ground 8 rx1- - lvds receiver signal (g0-g5, b0-b1) 9 rx1+ + lvds receiver signal (g0-g5, b0-b1) 10 gnd ground 11 rx2- - lvds receiver signal (b2-b5, hs, vs, de) 12 rx2+ + lvds receiver signal (b2-b5, hs, vs, de) 13 gnd ground 14 rxclk2- - lvds receiver clock signal 15 rxclk2+ + lvds receiver clock signal 16 gnd ground 17 rx3- - lvds receiver signal (r6-r7, g6-g7, b6-b7) 18 rx3+ + lvds receiver signal (r6-r7, g6-g7, b6-b7) 19 gnd ground 20 nc reserved note: all gnd (ground) pins should be connected together and to vss, which should also be connected to the lcd s metal frame. all vcc (power input) pins should be connected together. pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 9/24 no reproduction and redistribution allowed 8bits input: g150xg02 v0 only catch bit 2 to bit 7 for 6 bit display 6bits input data format marked with ( ). g0(0)r5(r3)r4(r2)r3(r1)r2(r0) r1(0)r0(0) rsv b7(b5)b6(b4)g7(g5)g6(g4) r7(r5)r6(r4) devshs b5(b3)b4(b2) b3(b1)b2(b0) b1(0)b0(0)g5(g3)g4(g2)g3(g1) g2(g0)g1(0) rclkp1 rap1 rbp1 rcp1 rdp1 g0(0)r5(r3)r4(r2)r3(r1)r2(r0) r1(0)r0(0) rsv b7(b5)b6(b4)g7(g5)g6(g4) r7(r5)r6(r4) b5(b3)b4(b2) b3(b1)b2(b0) b1(0)b0(0)g5(g3)g4(g2)g3(g1) g2(g0)g1(0) rclkp2 rap2 rbp2 rcp2 rdp2 pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 10/24 no reproduction and redistribution allowed backlight connector pin configuration pin# signal name 1 lamp high voltage 2 ground electrical specification (lamp spec.) symbol parameter min typ max units condition ircfl ccfl operation range 3.0 6.5 8.5 [ma] rms (ta=25 ) icfl ccfl inrush current - - 20 [ma] (ta=25 ) fcfl ccfl frequency 40 55 60 [khz] (ta=25 ) vicfl ccfl ignition voltage 1000 - - [volt] rms (ta=25 ) (reference) vicfl ccfl ignition voltage 1300 - - [volt] rms (ta= 0 ) (reference) vcfl ccfl discharge voltage - 680 725 [volt] rms (ta=25 ) pcfl ccfl power consumption @ 6.5 ma (excluding inverter) - 17.7 24.7 [watt] (ta=25 ) note1: ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd note2: calculate value for reference ( ircfl x vcfl x 4 = pcfl) note3: ccfl inverter should be able to give out a power that has a generating capacity of over 1300 voltage. lamp units need 1300 voltage minimum for ignition note4: ccfl life time 50,000 hr at 6.5 ma, it s defined as when the brightness is reduced by half. it s recommended not to exceed 6.5 ma for ccfl life time concern and it s prohibited to exceed 8.5ma for safety concern pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 11/24 no reproduction and redistribution allowed 3-3 signal timing specifications this is the signal timing required at the input of the user connector. all of the interface signal timing should be satisfied with the following specifications for it s proper operation. timing table (de mode only) parameter symbol min. typ. max. unit clock frequency 1/ t clock 50 65 81 mhz period t v 776 806 1024 active t vd 768 768 768 vertical section blanking t vb 8 38 256 t line period t h 1054 1344 2048 active t hd 1024 1024 1024 horizontal section blanking t hb 30 320 1024 t clock 3-4 signal timing waveforms note : since this is de mode only, please set the hs and vs to logic 1. dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 12/24 no reproduction and redistribution allowed 3-5 color input data reference the brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ------- blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 blue blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 13/24 no reproduction and redistribution allowed 3-6 power on/off sequence vin and lamp power on/off sequence are as follows. the timing of interface signal are shown in the table. values symbol min typ max unit t1 0.5 - 10 ms t2 0.5 25 50 ms t3 200 - - ms t4 200 - - ms t5 0.5 16 50 ms t6 0.5 - 10 ms t7 1000 - - ms apply the lamp voltage within the lcd operating range. when the backlight turns on before the lcd operation or the lcd turns off before the backlight turns off, the display may momentarily become abnormal. caution : the above on/off sequence should be applied to avoid abnormal function in the display. in case of handling, make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 14/24 no reproduction and redistribution allowed 3-7 function block diagram the following diagram shows the functional block of 15.0 inches color tft-lcd module: pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 15/24 no reproduction and redistribution allowed 4. optical specification optical characteristics are determined after the unit has been on and stable for approximately 30 minutes in a dark environment at 25 . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig.4-1 optical measurement equipment and method values parameter symbol min. typ. max. units notes contrast ratio cr 400 500 - 1, 2 surface luminance, white l wh - 550 - cd/ O 1, 3 uniformity of luminance white 5 p - - - 1, 4 response time tr (90%-10%) - ms 1, 5 tf (10%-90%) - ms tr + tf 12 ms color coordinates - - - 1 red r x - r y - green g x - g y - blue b x - b y - white w x - w y - black d x - d y typ. -0.03 - typ. +0.03 viewing angle (contrast ration>10) - - - x axis, right( =0 ) r - 70 - degree 6 x axis, left( =180 ) l - 70 - y axis, up( =90 ) u - 60 - y axis, down ( =0 ) d - 60 - sr3 or equivalent pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 16/24 no reproduction and redistribution allowed note: 1. optical test condition: 2. contrast ratio (cr) is defined mathematically as: 3 . surface luminance is luminance value at point 1 across the lcd surface 50cm from the surface with all pixels displaying white. from more information see fig 4-2. when i bl = 6.5ma, l wh =450cd/ O (typ.) l wh =lon1, where lon1 is the luminance with all pixels displaying white at center 1 location. fig.4-2 optical measurement point 4 . the variation in surface luminance, white is defined (center of screen) as: white(5p) =maximum(l on1 , l on2 , ,l on5 )/minimum(l on1 , l on2 , l on5 ) test system detector inverter lamp current warm up fpm-520 sr3 fine qf132-v1 6.5 ma 30 min contrast ratio (cr)= brightness on the "white" state brightness on the "black" state pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 17/24 no reproduction and redistribution allowed 5 . definition of response time: the output signals of photo-detector are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. the response time interval between the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10 % 90 % 100 % fig.4-3 response time pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 18/24 no reproduction and redistribution allowed 6 . viewing angle: viewing angle is the measurement of contrast ratio, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. fig.4-4 viewing angle definition pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 19/24 no reproduction and redistribution allowed 5. mechanical characteristics the contents provide general mechanical characteristics for the model t150xg01. in addition the figures in the next page are detailed mechanical drawing of the lcd. horizontal 326.5mm vertical 253.5mm outline dimension depth 14.4mm(w/o inverter) horizontal 304.128mm active display area vertical 228.096mm weight 1350g (typ.) surface treatment hard coating (3h), ag pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 20/24 no reproduction and redistribution allowed pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 21/24 no reproduction and redistribution allowed pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 22/24 no reproduction and redistribution allowed 6. reliability test items environment test condition no test item condition remark 1 high temperature storage test ta=60 300h note 1,2,3 2 low temperature storage test ta= -20 300h note 1,2,3 3 high temperature operation test ta=50 300h note 1,2,3 4 low temperature operation test ta=0 300h note 1,2,3 5 high temperature & high humidity operation 50 , 80%rh, 300hrs (no condensation) note 1,2,3 6 temperature cycling (non-operation) -20 ~60 1h, 10mins, 1h, 5cycles note 1,2,3 7 vibration test (non-operation) vibration level : 1g rms bandwidth : 10-200-10hz duration: x, y, z 120min one time each direction note 1,2,3 8 shock test (non-operation) shock level: 50g waveform: half since wave, 20ms direction: x, y, z one time each direction note 1,2,3 9 electrostatic discharge (non-operation) 150 pf,150 ,10kv,1 second, 9 position on the panel, 10 times each place note 3 note 1: evaluation should be tested after storage at room temperature for one hour. note 2: there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. note 3: judgment: function and display ok. pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 23/24 no reproduction and redistribution allowed 7. international standard 7-1. safety (1) ul1950 third edition, underwriters laboratories, inc. jan. 28, 1995 standard for safety of information technology equipment including electrical business equipment. 8. packing notes: 1. max capacity: 10 lcd module/carton 2. max weight: 14kg/carton 3. the outside dimension of carton is 490(l)mmx390(w)mmx360(h)mm pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 24/24 no reproduction and redistribution allowed 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1 mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2 operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage: v= 200mv(over and under shoot voltage) (2) response time depends on the temperature. (in lower temperature, it becomes longer..) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time (required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear pdf created with pdffactory trial version www.pdffactory.com www..net
? copyright au optronics, inc. 2004 all rights reserved. g150xg02 v0 spec ver0.1 25/24 no reproduction and redistribution allowed or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimize the interface. 9-3 electrostatic discharge control since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wrist band etc. and don t touch interface pin directly. 9-4 precautions for strong light exposure strong light exposure causes degradation of polarizer and color filter. 9-5 storage when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 9-6 handling precautions for protection film (1) the protection film is attached to the bezel with a small masking tape. when the protection film is peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of flue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue remains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. pdf created with pdffactory trial version www.pdffactory.com www..net

▲Up To Search▲

Price & Availability of G150XG02V0

	To Download G150XG02V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .